Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 972)

IPv6 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
37.20 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ipv6 access-list (IPv6 Software ACLs)
Use the show ipv6 access-list standard command to display a specified standard named
IPv6 access-list that has been defined using the
ipv6 access-list standard (named)
command.
Syntax show ipv6 access-list standard
Mode User Exec and Privileged Exec
Example To show the ipv6 access-list specified with the name acl_name use the following
command:
Output Figure 37-1: Example output from the show ipv6 access-list command
Related Commands ipv6 access-list extended (named)
(ipv6 access-list extended IP protocol filter)
(ipv6 access-list extended TCP UDP filter)
ipv6 access-list standard (named)
(ipv6 access-list standard filter)
Parameter Description
standard Named standard access-list.
<access-list-name> Specify an IPv6 access-list name.
awplus# show ipv6 access-list standard acl_name
Named Standard IPv6 access-list name
deny any