Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1958)

LLDP Commands
Software Reference for x310 Series Switches
71.32 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
location elin-location
Use this command to create or modify an ELIN location.
Use the no variant of this command to delete an ELIN location, and remove it from any
ports it has been assigned to.
Syntax location elin-location identifier <elin-loc-id>
no location elin-location identifier <elin-loc-id>
Default By default there are no ELIN location identifiers.
Mode Global Configuration
Usage Up to 400 locations can be configured on the switch for each type of location information,
up to a total of 1200 locations.
To assign this ELIN location to particular ports, so that it can be advertised in TLVs from
those ports, use the
location elin-location-id command.
Examples To create a new ELIN location with ID 1, and configure it with ELIN "1234567890", use the
commands:
To delete existing ELIN location with ID 1, use the commands:
Related Commands location elin-location-id
show lldp local-info
show location
Parameter Description
<elin> Emergency Location Identification Number (ELIN) for
Emergency Call Service (ECS), in the range 10 to 25 digits long. In
North America, ELINs are typically 10 digits long.
<elin-loc-id> A unique ELIN location identifier, in the range 1 to 4095.
awplus# configure terminal
awplus(config)# location elin-location 1234567890 identifier 1
awplus# configure terminal
awplus(config)# no location elin-location identifier 1