Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 616)

Power over Ethernet Commands
Software Reference for x310 Series Switches
23.18 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show power-inline counters
This command displays Power over Ethernet (PoE) event counters for ports on the Power
Sourcing Equipment (PSE). The PoE event counters displayed can also be accessed by
objects in the PoE MIB (RFC 3621). See
Chapter 69, SNMP MIBs for information about
which PoE MIB objects are supported.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show power-inline counters [<port-list>]
Mode User Exec and Privileged Exec
Usage To display all PoE event counters for all PoE ports on the PSE, do not enter the optional
interface parameter.
Examples To display all PoE event counters for all PoE ports on the PSE, use the command:
To display the PoE event counters for the port range 1.0.1 to 1.0.3, use the command:
Output Figure 23-3: Example output from the show power-inline counters command
Parameter Description
<port-list> Enter the PoE port(s) to display all PoE event counters for them.
awplus# show power-inline counters
awplus# show power-inline counters interface port1.0.1-1.0.3
awplus#show power-inline counters interface port1.0.4-port1.0.12
PoE Counters:
Interface MPSAbsent Overload Short Invalid Denied
port1.0.4 0 0 0 0 0
port1.0.5 0 0 0 0 0
port1.0.6 0 0 0 0 0
port1.0.7 0 0 0 0 0
port1.0.8 0 0 0 0 0
port1.0.9 0 0 0 0 0
port1.0.10 0 0 0 0 0
port1.0.11 0 0 0 0 0
port1.0.12 0 0 0 0 0