Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1864

SNMP MIBs

Software Reference for x310 Series Switches

69.52

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

atNtpPeerVersion

{ atNtpPeerEntry 5 }

The NTP version the peer supports. Can be one of
the following:

■

0 - unknown - default

■

1 - version 1

■

2 - version 2

■

3 - version 3

■

4 - version 4

atNtpPeerKeyNumber

{ atNtpPeerEntry 6 }

The authentication key number.
Default number is 0.

atNtpPeerRow Status

{ atNtpPeerEntry 7 }

The current status of this peer entry.
The following values may be returned when
reading this object:

■

active (1) - this value is returned on reading of
this entry.

■

createAndGo (4) - this value is set by the
management application when creating a
new entry

■

destroy (6) - value set by the management
application when deleting the entry.

When an entry is deleted, all subsequent entries
in the table will be re-indexed.

atNtpAssociationTable

{ atNtp 10 }

Table containing information on the Network
Time Protocol (NTP) associations.
Indexed by:

■

atNtpAssociationIndex

atNtpAssociationEntry

{ atNtpAssociationTable 1 }

Information about a single NTP server or peer
configuration.

atNtpAssociationIndex

{ atNtpAssociationEntry 1 }

The index number corresponding to a particular
NTP server or peer configuration in the system.
To create a new entry, the value of this object
should be the same as that of the value of
atNtpPeerIndexNext object, otherwise the entry
creation will fail.

atNtpAssociationPeerAddr

{ atNtpAssociationEntry 2 }

The host name, or the IP address of the NTP peer.
When a new row (entry) is created, this object is
set with a default of ‘0.0.0.0’, and the management
application should change it to a desired value by
using a SET operation.

atNtpAssociationStatus

{ atNtpAssociationEntry 3 }

The status of this association. Can be one of the
following:

■

master (synced)

■

master (unsynced)

■

selected

■

candidate

■

configured

■

unknown

atNtpAssociationConfigure
d

{ atNtpAssociationEntry 4 }

The value in this object specifies whether the
association is from configuration or not. Value can
be:

■

configured

■

dynamic

atNtpAssociationRefClkAdd
r

{ atNtpAssociationEntry 5 }

The IP Address for the reference clock.

Table 69-15: Objects defined in AT-NTP-MIB(cont.)

Object Object

Identifier

Description