Crypto pki trustpoint local – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1343
Local RADIUS Server Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
51.15
crypto pki trustpoint local
Use this command to declare the Local CA (Certificate Authority) as the trustpoint that the
system uses. The ca-trustpoint configuration mode is available after this command is
issued.
Use the no variant of this command to delete all information and certificates associated
with Local CA as the trustpoint.
Syntax
crypto pki trustpoint local
no crypto pki trustpoint local
Default
Local CA is not a trustpoint.
Mode
Global Configuration
Examples
Use the following commands to declare the Local CA as the trustpoint.
Use the following commands to delete all information and certificates associated with the
Local CA.
To create a client certificate for all users registered to the local RADIUS server, use the
following commands:
Related Commands
awplus#
configure terminal
awplus(config)#
crypto pki trustpoint local
awplus#
configure terminal
awplus(config)#
no crypto pki trustpoint local
awplus(config)#
crypto pki trustpoint local
awplus(ca-trust-point)#
exit
awplus(config)#
crypto pki enroll local alternative