Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1624)

AMF Commands
Software Reference for x310 Series Switches
60.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
timeout Sets the execution timeout for packet logging
Seconds
num-pkts Sets the number of packets to be dumped
pkts The actual number of packets
filter Sets debug to filter packets
node Sets the filter on packets for a particular Node
Node name
interface Sets the filter to dump packets from an interface (portx.x.x)
ifname Interface port or virtual-link
pkt-type Sets the filter on packets with a particular AMF packet type
1 Crosslink Hello BPDU packet with crosslink links information. Enter
1 to select this packet type.
2 Crosslink Hello BPDU packet with downlink domain information.
Enter 2 to select this packet type.
3 Crosslink Hello BPDU packet with uplink information. Enter 3 to
select this packet type.
4 Downlink and uplink hello BPDU packets. Enter 4 to select this
packet type.
5 Non broadcast hello unicast packets. Enter 5 to select this packet
type.
6 Stack hello unicast packets. Enter 6 to select this packet type.
7 Database description. Enter 7 to select this packet type.
8 DBE request. Enter 8 to select this packet type.
9 DBE update. Enter 9 to select this packet type.
10 DBE bitmap update. Enter 10 to select this packet type.
11 DBE acknowledgment. Enter 11 to select this packet type.
Parameter Description