Clear power-inline counters interface – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 601
Power over Ethernet Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
23.3
clear power-inline counters interface
This command will clear the counters from a specified port, a range of ports, or all ports on
the Power Sourcing Equipment (PSE). If no ports are entered then PoE counters for all
ports are cleared. It will also clear all Power over Ethernet (PoE) counters supported by the
Power Ethernet MIB (RFC 3621).
Syntax
clear power-inline counters interface [<port-list>]
Mode
Privileged Exec
Usage
The PoE counters are displayed with the
command.
Examples
To clear the PoE counters for port1.0.2 only, use the following command:
To clear the PoE counters for port1.0.1 through port1.0.10, use the following
command:
To clear the PoE counters for all ports, use the following command:
Validation
Commands
Parameter
Description
<port-list>
Selects the port or ports whose counters are to be cleared.
awplus#
clear power-inline counters interface port1.0.2
awplus#
clear power-inline counters interface port1.0.1-
port1.0.10
awplus#
clear power-inline counters interface