Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1943)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.17
lldp timer
This command sets the value of the transmit interval. This is the interval between regular
transmissions of LLDP advertisements.
The no variant of this command sets the transmit interval back to its default.
Syntax lldp timer <5-32768>
no lldp timer
Default The default transmit interval is 30 seconds.
Mode Global Configuration
Examples To set the transmit interval to 90 seconds, use the commands:
To set the transmit interval back to its default, use the commands:
Related Commands lldp tx-delay
show lldp
Parameter Description
<5-32768> The transmit interval in seconds. The transmit interval must be at
least four times the transmission delay timer (
lldp tx-delay
command).
awplus# configure terminal
awplus(config)# lldp timer 90
awplus# configure terminal
awplus(config)# no lldp timer