Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 224)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.24 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show clock
This command displays the system’s current configured local time and date. It also
displays other clock related information such as timezone and summertime configuration.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show clock
Mode User Exec and Privileged Exec
Example To display the system’s current local time, use the command:
Output Figure 8-1: Example output from the show clock command for a switch using New
Zealand time
Related Commands clock set
clock summer-time date
clock summer-time recurring
clock timezone
awplus# show clock
Local Time: Mon, 6 Aug 2007 13:56:06 +1200
UTC Time: Mon, 6 Aug 2007 01:56:06 +0000
Timezone: NZST
Timezone Offset: +12:00
Summer time zone: NZDT
Summer time starts: Last Sunday in September at 02:00:00
Summer time ends: First Sunday in April at 02:00:00
Summer time offset: 60 mins
Summer time recurring: Yes
Table 8-1: Parameters in the output of the show clock command
Parameter Description
Local Time
Current local time.
UTC Time
Current UTC time.
Timezone
The current configured timezone name.
Timezone Offset
Number of hours offset to UTC.
Summer time zone
The current configured summertime zone name.
Summer time starts
Date and time set as the start of summer time.
Summer time ends
Date and time set as the end of summer time.
Summer time offset
Number of minutes that summer time is offset from the
system’s timezone.
Summer time
recurring
Whether the device will apply the summer time settings
every year or only once.