Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 407)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.45
show storm-control
Use this command to display storm-control information for all interfaces or a particular
interface.
Syntax show storm-control [<port>]
Mode User Exec and Privileged Exec
Example To display storm-control information for port1.0.2, use the following command:
Output Figure 15-13: Example output from the show storm-control command for port1.0.2
Example To display storm-control information for all ports, use the following command:
Output Figure 15-14: Example output from the show storm-control command for all ports
Related Commands storm-control level
Parameter Description
<port> The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
awplus# show storm-control port1.0.2
Port BcastLevel McastLevel DlfLevel
port1.0.2 40. 0% 100. 0% 100. 0%
awplus# show storm-control
awplus#show storm-control
Port BcastLevel McastLevel DlfLevel
port1.0.1 100.0% 100.0% 100.0%
port1.0.2 100.0% 100.0% 100.0%
port1.0.3 100.0% 100.0% 100.0%
port1.0.4 100.0% 100.0% 100.0%
port1.0.5 100.0% 100.0% 100.0%
port1.0.6 100.0% 100.0% 100.0%
port1.0.7 100.0% 100.0% 100.0%
port1.0.8 100.0% 100.0% 100.0%
port1.0.9 100.0% 100.0% 100.0%
port1.0.10 100.0% 100.0% 100.0%
port1.0.11 100.0% 100.0% 100.0%
port1.0.12 100.0% 100.0% 100.0%
port1.0.13 100.0% 100.0% 100.0%
port1.0.14 100.0% 100.0% 100.0%
port1.0.15 100.0% 100.0% 100.0%
port1.0.16 100.0% 100.0% 100.0%
port1.0.17 100.0% 100.0% 100.0%
port1.0.18 100.0% 100.0% 100.0%
port1.0.19 100.0% 100.0% 100.0%
port1.0.20 100.0% 100.0% 100.0%
port1.0.21 100.0% 100.0% 100.0%
port1.0.22 100.0% 100.0% 100.0%
port1.0.23 100.0% 100.0% 100.0%
port1.0.24 100.0% 100.0% 100.0%