Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 703)

IPv6 Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 27.25
show ipv6 route summary
Use this command to display the summary of the current NSM RIB entries.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ipv6 route summary
Mode User Exec and Privileged Exec
Example To display IP route summary, use the following command:
Output Figure 27-5: Example output from the show ipv6 route summary command
Related Commands show ip route
show ip route database
traceroute ipv6
Use this command to trace the route to the specified IPv6 host.
Syntax traceroute ipv6 {<ipv6-addr>|<hostname>}
Mode User Exec and Privileged Exec
Example To run a traceroute for the IPv6 address 2001:0db8::a2, use the following command:
Related Commands ping ipv6
awplus# show ipv6 route summary
IPv6 routing table name is Default-IPv6-Routing-Table(0)
IPv6 routing table maximum-paths is 4
RouteSource Networks
connected 4
FIB 5
Parameter Description
<ipv6-addr>
The destination IPv6 address. The IPv6 address uses the format
X:X::X:X.
<hostname>
The destination hostname.
awplus# traceroute ipv6 2001:0db8::a2