Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1965)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.39
show lldp local-info
This command displays local LLDP information that can be transmitted through specified
ports. If no port list is entered, local LLDP information for all ports is displayed.
Syntax show lldp local-info [base] [dot1] [dot3] [med] [interface
<port-list>]
Mode User Exec and Privileged Exec
Usage Whether and which local information is transmitted in advertisements via a port depends
on:
■ whether the port is set to transmit LLDP advertisements ( lldp transmit receive
command)
■ which TLVs it is configured to send ( lldp tlv-select command, lldp med-tlv-select
command)
Examples To display local information transmitted via port 1.0.1, use the command:
To display local information transmitted via all ports, use the command:
Parameter Description
base Information for base TLVs.
dot1 Information for 802.1 TLVs.
dot3 Information for 802.3 TLVs.
med Information for LLDP-MED TLVs.
<port-list> The ports for which the local information is to be shown.
awplus# show lldp local-info interface port1.0.1
awplus# show lldp local-info