Storm-protection, Storm-protection command on – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1052

QoS Commands

Software Reference for x310 Series Switches

39.46

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

storm-protection

Use this command to enable the Policy Based Storm Protection (such as QSP - QoS Storm
Protection). Storm protection is activated as soon as a port is enabled.

The no variant of this command disables Policy Based Storm Protection.

Syntax

storm-protection

no storm-protection

Default

By default, storm protection is disabled.

Mode

Policy Map Class Configuration

Examples

To enable QSP on cmap2 in pmap2, use the following commands:

To disable QSP on cmap2 in pmap2, use the following commands:

Related Commands

storm-action
storm-downtime
storm-rate
storm-window

awplus#

configure terminal

awplus(config)#

policy-map pmap2

awplus(config-pmap)#

class cmap2

awplus(config-pmap-c)#