Show cpu history – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 229
System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
8.29
show cpu history
This command prints a graph showing the historical CPU utilization.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show [<stack-ID>]cpu history
Mode
User Exec and Privileged Exec
Usage
This command’s output displays three graphs of the percentage CPU utilization:
■
per second for the last minute, then
■
per minute for the last hour, then
■
per 30 minutes for the last 30 hours.
If this command is entered on the stack master, it will print graphs for all the stack
members. A stack member heading will be displayed to distinguish the different graphs
for every stack member.
Examples
To display a graph showing the historical CPU utilization of the device, use the command:
To display the CPU utilization history graph for stack member 2, use the command:
where 2 is the node id of the stack member.
Parameter
Description
<stack-ID>
Stack member number, from 1 to 4.
awplus#
show cpu history
awplus#
show 2 cpu history