Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 220)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.20 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
max-fib-routes
This command enables you to control the maximum number of FIB routes configured. It
operates by providing parameters that enable you to configure preset maximums and
warning message thresholds. The operation of these parameters is explained in the
Parameter / Descriptions table shown below.
Use the no variant of this command to set the maximum number of fib routes to the
default of 4294967294 fib routes.
Syntax max-fib-routes <1-4294967294> [<1-100>|warning-only]
no max-fib-routes
Default The default number of fib routes is the maximum number of fib routes (4294967294).
Mode Global Configuration
Examples To set the maximum number of dynamic routes to 2000 and warning threshold of 75%,
use the following commands:
Note To set static routes, use the max-static-routes command on page 8.22 .
Parameter Description
max-fib-routes This is a the maximum number of routes that can be stored in
the switch’s Forwarding Information dataBase. In practice, other
practical system limits would prevent this maximum being
reached.
<1-4294967294> The allowable configurable range for setting the maximum
number of FIB-routes.
<1-100> This parameter enables you to optionally apply a percentage
value. This percentage will be based on the maximum number
of FIB routes you have specified. This will cause a warning
message to appear when your routes reach your specified
percentage value. Routes can continue to be added until your
configured maximum value is reached.
warning-only This parameter enables you to optionally apply a warning
message. If you set this option a warning message will appear if
your maximum configured value is reached. Routes can
continue to be added until your switch reaches either the
maximum capacity value of 4294967294, or a practical system
limit.
awplus# config terminal
awplus(config)# max-fib-routes 2000 75