Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 80)

CLI Navigation Commands
Software Reference for x310 Series Switches
4.2 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Command List
This chapter provides an alphabetical reference for the commands used to navigate
between different modes. This chapter also provides a reference for the help and show
commands used to help navigate within the CLI.
configure terminal
This command enters the Global Configuration command mode.
Syntax configure terminal
Mode Privileged Exec
Example To enter the Global Configuration command mode (note the change in the command
prompt), enter the command:
disable (Privileged Exec mode)
This command exits the Privileged Exec mode, returning the prompt to the User Exec
mode. To end a session, use the
exit command.
Syntax disable
Mode Privileged Exec
Example To exit the Privileged Exec mode, enter the command:
Related Commands enable (Privileged Exec mode)
end
exit
awplus# configure terminal
awplus(config)#
awplus# disable
awplus>