Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1374)

Secure Shell (SSH) Introduction
Software Reference for x310 Series Switches
52.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To remove the configured message for the login banner, use the command:
Monitoring the Server and Managing Sessions
To display the current status of the SSH server, use the command:
To display the current status of SSH sessions on your device, use the command:
Note that this displays both SSH server and SSH client sessions that your Allied Telesis
device is running. Use this command to view the unique identification number assigned
to each incoming or outgoing SSH session. You need the ID number when terminating a
specific session from your device.
To terminate a session, or all sessions, use the command:
Debugging the Server
Information which may be useful for troubleshooting the SSH server is available using the
SSH debugging function. You can enable server debugging while the SSH server is
functioning. Use the command:
To disable SSH server debugging, use the command:
awplus(config)# no banner login
awplus# show ssh server
awplus# show ssh
awplus# clear ssh {<1-65535>|all}
awplus# debug ssh server [brief|full]
awplus# no debug ssh server