Clear atmf links statistics – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1620

AMF Commands
Software Reference for x310 Series Switches
60.32
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Example-1
To add all nodes in the AMF to the working-set, use the command:
Displays an output screen similar to the one shown below:
Example-2
To return to the local prompt, and connectivity to only the local node; use the command:
clear atmf links statistics
This command resets the values of all AMF link, port, and global statistics to zero.
Syntax
clear atmf links statistics
Mode
Privilege Exec
Example
To reset the AMF link statistics values, use the command:
Related Commands
node1#
atmf working-set group all
Note
This command adds the implicit group “all” to the working set; where “all”
comprises all nodes in the AMF.
=========================================
node1, node2, node3, node4, node5, node6:
==============================================
Working set join
ATMF_NETWORK_Name[6]#
ATMF_NETWORK_Name[6]#
atmf working-set group local
node1#
Parameter definitions from the working-set command
Parameter
Definition
node1, node2 etc
The name of the nodes - as set by the
.
ATMF_Network_Name
The name of the AMF network - as set by the
[6]
The number of nodes in the working-set.
node_1#
clear atmf links statistics