Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1182)

Authentication Commands
Software Reference for x310 Series Switches
43.56 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
auth-web-server redirect-url
This command sets a URL for supplicant (client device) authentication. When a supplicant
is authorized it will be automatically redirected to the specified URL. Note that if the http
redirect feature is used then this command is ignored.
Use the no variant of this command to delete the URL string set previously.
Syntax auth-web-server redirect-url <url>
no auth-web-server redirect-url
Default The redirect URL for the web authentication server feature is not set by default (null).
Mode Global Configuration
Examples To enable and set redirect a URL string www.alliedtelesis.com for the web
authentication server, use the following commands:
To delete a redirect URL string, use the following commands:
Validation
Commands
show auth-web
show auth-web-server
show running-config
Related Commands auth-web-server http-redirect
auth-web-server redirect-delay-time
Parameter Description
<url> URL (hostname or dotted IP notation).
awplus# configure terminal
awplus(config)# auth-web-server redirect-url
http://www.alliedtelesis.com
awplus# configure terminal
awplus(config)# no auth-web-server redirect-url