Ip igmp snooping fast-leave – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 759

IGMP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
31.21
ip igmp snooping fast-leave
Use this command to enable IGMP Snooping fast-leave processing. Fast-leave processing
is analogous to immediate-leave processing. The IGMP group-membership entry is
removed as soon as an IGMP leave group message is received, without sending out a
group-specific query.
Use the no variant of this command to disable fast-leave processing.
Syntax
ip igmp snooping fast-leave
no ip igmp snooping fast-leave
Default
IGMP Snooping fast-leave processing is disabled.
Mode
Interface Configuration for a VLAN interface.
Usage
This IGMP Snooping command can only be configured on VLAN interfaces.
Ensure your VLAN is configured first: see
Example
This example shows how to enable fast-leave processing on the VLAN interface vlan2:
Validation
Commands
show ip igmp interface
show running-config
awplus#
configure terminal
awplus(config)#
interface vlan2
awplus(config-if)#
ip igmp snooping fast-leave