Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1603

AMF Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
60.15
Example
To specify the switch to be a member of AMF groups named, Marketing, Sales, and
Building_2, use the following command:
First add the nodes “master_node1” and “member_node_1” to the working-set:
This command returns the following output confirming that the nodes “master_node”
and “node_2” are now part of the working-set:
This command returns the following output displaying the groups that are members of
the working-set.
Related Commands
show atmf group
show atmf group members
VCF-1#
configure terminal
VCF-1(config)#
atmf group marketing,sales,building_2
master_node#
atmf working-set master_node1,member_node_1
====================
master_node1, member_node_1
=======================
Working set join
atmf-net[2]#
configure terminal
Add the groups building1 and sales to the working-set
atmf-net[2](config)#
atmf group building1,sales
atmf-net[2](config)#
exit
Show the groups that are members of the working-set
atmf-net[2]#
show atmf group
====================
master_node1
=======================
AMF group information
building1, sales, master, poe, x8100