Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1997)

RMON Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 74.9
show rmon history
Use this command to display the parameters specified on all the currently defined RMON
history collections on the device.
Syntax show rmon history
Mode User Exec and Privileged Exec
Output Figure 74-2: Example output from the show rmon history command
Note Only the history for switch port interfaces, not for VLAN interfaces, can be
shown.
awplus#sh rmon history
history index = 56
data source ifindex = 4501
buckets requested = 34
buckets granted = 34
Interval = 2000
Owner Andrew
history index = 458
data source ifindex = 5004
buckets requested = 400
buckets granted = 400
Interval = 1500
Owner trev
========================================================
Note The following etherStats counters are not currently available for Layer 3
interfaces:
■ etherStatsBroadcastPkts
■ etherStatsCRCAlignErrors
■ etherStatsUndersizePkts
■ etherStatsOversizePkts
■ etherStatsFragments
■ etherStatsJabbers
■ etherStatsCollisions
■ etherStatsPkts64Octets
■ etherStatsPkts65to127Octets
■ etherStatsPkts128to255Octets
■ etherStatsPkts256to511Octets
■ etherStatsPkts512to1023Octets
■ etherStatsPkts1024to1518Octets