Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2062)

Ping-Polling Commands
Software Reference for x310 Series Switches
79.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
clear ping-poll
This command resets the specified ping poll, or all ping poll instances. This clears the ping
counters, and changes the status of polled devices to unreachable. The polling instance
changes to the polling frequency specified with the
critical-interval command. The
device status changes to reachable once the device responses have reached the up-
count .
Syntax clear ping-poll {<1-100>|all}
Mode Privileged Exec
Examples To reset the ping poll instance 12, use the command:
To reset all ping poll instances, use the command:
Related Commands active (ping-polling)
ping-poll
show ping-poll
Parameter Description
<1-100> A ping poll ID number. The specified ping poll instance has its
counters cleared, and the status of the device it polls is
changed to unreachable.
all Clears the counters and changes the device status of all polling
instances.
awplus# clear ping-poll 12
awplus# clear ping-poll all