Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 394

Switching Commands

Software Reference for x310 Series Switches

15.32

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

See the sample output captured when packets were switched and mac addresses were
learned:

Note the new mac addresses learned for port1.0.4 and port1.0.6 added as
dynamic entries.

Note the first column of the output below shows VLAN IDs if multiple VLANs are
configured:

Also note manually configured static mac-addresses are shown to the right of the type
column:

Related Commands

clear mac address-table dynamic
clear mac address-table static
mac address-table static

awplus#show mac address-table

VLAN Port MAC State
1 unknown 0000.cd28.0752 static
1 port1.0.6 0030.846e.9bf4 dynamic
1 port1.0.4 0030.846e.bac7 dynamic
ARP - 0000.cd00.0000 static

awplus#show mac address-table

VLAN Port MAC State
1 unknown 0000.cd28.0752 static
1 port1.0.4 0030.846e.bac7 dynamic
2 unknown 0000.cd28.0752 static
2 port1.0.6 0030.846e.9bf4 dynamic
ARP - 0000.cd00.0000 static

awplus(config)#mac address-table static 0000.1111.2222 for int
port1.0.3 vlan 2
awplus(config)#end
awplus#
awplus#show mac address-table

VLAN Port MAC State
1 unknown 0000.cd28.0752 static
1 port1.0.2 0030.846e.bac7 dynamic
2 port1.0.3 0000.1111.2222 static
2 unknown 0000.cd28.0752 static
2 port1.0.5 0030.846e.9bf4 dynamic
ARP - 0000.cd00.0000 statics