Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1996)

RMON Commands
Software Reference for x310 Series Switches
74.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show rmon event
Use this command to display the events configured for the RMON probe.
Syntax show rmon event
Mode User Exec and Privileged Exec
Output Figure 74-1: Example output from the show rmon event command
Example To display the events configured for the RMON probe, use this command:
Related Commands rmon event
Note Only the events for switch port interfaces, not for VLAN interfaces, can be
shown.
awplus#sh rmon event
event Index = 787
Description TRAP
Event type log & trap
Event community name gopher
Last Time Sent = 0
Owner RMON_SNMP
event Index = 990
Description TRAP
Event type trap
Event community name teabo
Last Time Sent = 0
Owner RMON_SNMP
Note The following etherStats counters are not currently available for Layer 3
interfaces:
■ etherStatsBroadcastPkts
■ etherStatsCRCAlignErrors
■ etherStatsUndersizePkts
■ etherStatsOversizePkts
■ etherStatsFragments
■ etherStatsJabbers
■ etherStatsCollisions
■ etherStatsPkts64Octets
■ etherStatsPkts65to127Octets
■ etherStatsPkts128to255Octets
■ etherStatsPkts256to511Octets
■ etherStatsPkts512to1023Octets
■ etherStatsPkts1024to1518Octets
awplus# show rmon event