Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 255

System Configuration and Monitoring Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

8.55

■

Power Monitoring: Displays the received power measurement type, which can be
either OMA (Optical Module Amplitude) or Avg (Average Power) measured in μW.

Example

To display detailed information about the pluggable transceivers installed in a particular
port on the switch, use a command like:

To display detailed information about all the pluggable transceivers installed on the
switch, use the command:

Output

Figure 8-25: Example output from the show system pluggable detail command on a
switch

Note

For parameters that are not supported or not specified, a hyphen is displayed
instead.

awplus#

show system pluggable port1.0.24 detail

awplus#

show system pluggable detail

awplus#show system pluggable port1.0.24 detail
System Pluggable Information Detail

Port1.0.24
==========
Vendor Name: AGILENT
Device Name: HFCT-5710L
Device Type: 1000BASE-LX
Serial Number: 0402142241184360
Manufacturing Datecode: 040214
SFP Laser Wavelength: -
Link Length Supported
Single Mode Fiber : 10Km
OM1 (62.5um) Fiber: 550m
OM2 (50um) Fiber : 550m
Diagnostic Calibration: Internal
Power Monitoring: Avg
FEC BER support: -