Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 187)

File Management Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 7.41
To display the current running configuration of a switch for VLANs 1 and 3-5, use the
command:
Output Figure 7-14: Example output from a show running-config interface port1.0.2
command
Figure 7-15: Example output from the show running-config interface command
Related Commands copy running-config
show running-config
awplus# show running-config interface vlan1,vlan3-vlan5
awplus#sh running-config interface port1.0.2
!
interface port1.0.2
switchport
switchport mode access
!
awplus#show running-config interface
interface port1.0.1-1.0.6
switchport
switchport mode access
!
interface port1.0.25-1.0.26
switchport
switchport mode access
switchport access vlan 14
!
interface port1.0.27-1.0.28
switchport
switchport mode access
switchport access vlan 15
!
interface vlan1
ip address 192.168.1.1/24
ipv6 enable
ipv6 mld
!
interface vlan12
ip address 192.168.3.1/24
!
interface vlan13
ip address 192.168.2.1/24