Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1313)

Local RADIUS Server Introduction and Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 50.11
15 Login-Service
Integer. Valid values are:
■
LAT (4)
■ PortMaster (3)
■ Rlogin (1)
■
TCP-Clear (2)
■
TCP-Clear-Quiet (8)
■ Telnet (0)
■ X25-PAD (5)
■
X25-T3POS (6)
16 Login-TCP-Port Integer. Valid values are:
■ Rlogin (513)
■ Rsh (514)
■
Telnet (23)
18 Reply-Message string
19 Callback-Number string
20 Callback-Id string
22 Framed-Route string
23 Framed-IPX-Network IP address
24 State octets (Hexadecimal string followed by 0x)
25 Class octets (Hexadecimal string followed by 0x)
26 Vendor-Specific
Use the Vendor-specific Attribute Name. For valid
values, see
“Vendor-Specific RADIUS
Attributes” on page 50.18 .
27 Session-Timeout Integer
28 Idle-Timeout Integer
29 Termination-Action Integer. Valid values are:
■ Default (0)
■
RADIUS-Request (1)
30 Called-Station-Id string
31 Calling-Station-Id string
32 NAS-Identifier string
33 Proxy-State octets (Hexadecimal string followed by 0x)
34 Login-LAT-Service string
35 Login-LAT-Node string
36 Login-LAT-Group octets (Hexadecimal string followed by 0x)
37 Framed-AppleTalk-Link Integer
38 Framed-AppleTalk-
Network Integer
Table 50-1: Standard RADIUS Attributes(cont.)
Attribute ID and Name Value Type/Pre-defined Values