Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1551

Text mode
Original mode

AMF Introduction and Configuration

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

59.7

Working-set

An AMF working-set is a set of nodes, which is either arbitrarily user defined, or one of the
pre-defined working-set groups. Specifying or selecting a working-set allows CLI
commands to be executed on all nodes within the selected working-set with a single
command. A working-set can be defined, selected and configured from any node within
an AMF network.

Figure 59-3: AMF Working-set

Master 1

Member 1

AMF

working-set

Master 2

Member 2

Member 6

Member 5

Member 4

Member 3

AMF Network