Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1528)

EPSR Commands
Software Reference for x310 Series Switches
58.2 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Command List
This chapter provides an alphabetical reference for commands used to configure EPSR. For
more information, see
Chapter 57, EPSR Introduction and Configuration .
For information about modifying or redirecting the output from show commands to a file,
see
“Controlling “show” Command Output” on page 1.37 .
debug epsr
This command enables EPSR debugging.
The no variant of this command disables EPSR debugging.
Syntax debug epsr {info|msg|pkt|state|timer|all}
no debug epsr {info|msg|pkt|state|timer|all}
Mode Privileged Exec and Global Configuration
Examples To enable state transition debugging, use the command:
To disable EPSR packet debugging, use the command:
Related Commands undebug epsr
Parameter Description
info Send general EPSR information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above information from being sent to the console.
msg Send the decoded received and transmitted EPSR packets to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
pkt Send the received and transmitted EPSR packets as raw ASCII text to the
console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
state Send EPSR state transitions to the console.
Using this parameter with the no debug epsr command will explicitly
exclude state transitions from being sent to the console.
timer Send EPSR timer information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude timer information from being sent to the console.
all Send all EPSR debugging information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude any debugging information from being sent to the console.
awplus# debug epsr state
awplus# no debug epsr pkt