Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 820)

MLD and MLD Snooping Introduction and Commands
Software Reference for x310 Series Switches
32.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ipv6 mld interface
Use this command to display the state of MLD and MLD Snooping for a specified interface,
or all interfaces.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ipv6 mld interface [<interface>]
Mode User Exec and Privileged Exec
Example The following command displays MLD interface status on all interfaces enabled for MLD:
Output
Parameter Description
<interface> Interface name.
awplus# show ipv6 mld interface
awplus#show ipv6 mld interface
Interface vlan1 (Index 301)
MLD Enabled, Active, Querier, Version 2 (default)
Internet address is fe80::215:77ff:fec9:7468
MLD interface has 0 group-record states
MLD activity: 0 joins, 0 leaves
MLD robustness variable is 2
MLD last member query count is 2
MLD query interval is 125 seconds
MLD querier timeout is 255 seconds
MLD max query response time is 10 seconds
Last member query response interval is 1000 milliseconds
Group Membership interval is 260 seconds
MLD Snooping is globally enabled
MLD Snooping is enabled on this interface
MLD Snooping fast-leave is not enabled
MLD Snooping querier is enabled
MLD Snooping report suppression is enabled