Service dhcp-server – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1720

Text mode
Original mode

Dynamic Host Configuration Protocol (DHCP) Commands

Software Reference for x310 Series Switches

64.22

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

service dhcp-server

This command enables the DHCP server on your device. The server then listens for DHCP
requests on all IP interfaces. It will not run if there are no IP interfaces configured.

The no variant of this command disables the DHCP server.

Syntax

service dhcp-server

no service dhcp-server

Mode

Global Configuration

Example

To enable the DHCP server, use the commands:

Related Commands

ip dhcp pool
show ip dhcp server summary
subnet-mask

awplus#

configure terminal

awplus(config)#

service dhcp-server