Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1638)

AMF Commands
Software Reference for x310 Series Switches
60.50 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show atmf group members
This command will display all group memberships within an AMF working-set. Each node
in the AMF working set is automatically added to automatic groups which are defined by
hardware architecture. e.g x510, x610. Nodes that are configured as masters are
automatically assigned to the master group. User can define arbitrary groupings of AMF
members based on their own criteria, which can be used to select groups of nodes.
Syntax show atmf group members [user-defined|automatic]
Mode Privileged Exec
Example To display group membership of all nodes in a working-set, use the command:
Parameter Description
group The AMF group.
members AMF group members.
user-defined User defined group membership display.
automatic Automatic group membership display.
ATMF_NETWORK[9]# show atmf group members
Figure 60-9: Sample output from the show atmf group members command.
ATMF Group membership
Automatic Total
Groups Members Members
-----------------------------------------------------------------------------
master 1 Building_1
poe 1 HW_Team1
x510 3 SW_Team1 SW_Team2 SW_Team3
x900 1 Bld1_Floor_2
x610 1 HW_Team1
x8100 2 Building_1 Building_2
ATMF Group membership
User-defined Total
Groups Members Members
-----------------------------------------------------------------------------
marketing 1 Bld1_Floor_1
software 3 SW_Team1 SW_Team2 SW_Team3