Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 221)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 8.21
max-static-routes
Use this command to set the maximum number of static routes, excluding FIB (Forwarding
Information Base) routes. Note that FIB routes are set and reset using
max-fib-routes .
Use the no variant of this command to set the maximum number of static routes to the
default of 1000 static route
Syntax max-static-routes <1-1000>
no max-static-routes
Default The default number of static routes is the maximum number of static routes (1000).
Mode Global Configuration
Example To reset the maximum number of static routes to the default maximum, use the
command:
Related Commands max-fib-routes
Note To set dynamic FIB routes, use the max-fib-routes command on page 8.21 .
awplus# configure terminal
awplus(config)# no max-static-routes
Note Static routes are applied before adding routes to the RIB (Routing Information
Base). Therefore, rejected static routes will not appear in the running config.