Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1947)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.21
lldp tx-delay
This command sets the value of the transmission delay timer. This is the minimum time
interval between transmitting LLDP advertisements due to a change in LLDP local
information.
The no variant of this command sets the transmission delay timer back to its default
setting.
Syntax lldp tx-delay <1-8192>
no lldp tx-delay
Default The default transmission delay timer is 2 seconds.
Mode Global Configuration
Examples To set the transmission delay timer to 12 seconds, use the commands:
To set the transmission delay timer back to its default, use the commands:
Related Commands lldp timer
show lldp
Parameter Description
<1-8192> The transmission delay in seconds. The transmission delay cannot be
greater than a quarter of the transmit interval (
lldp timer command).
awplus# configure terminal
awplus(config)# lldp tx-delay 12
awplus# configure terminal
awplus(config)# no lldp tx-delay