Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 2148
Stacking Commands
Software Reference for x310 Series Switches
83.8
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Related Commands
Link down
Number of times that this unit's physical stack link has come
down.
Nbr re-init
Number of times that the neighbor is detected as having
reinitialised.
Nbr incompatible
Number of times that the neighbor is detected as
incompatible.
Nbr 2way comms
Number of times that the neighbor is in two way
communication. status.
Nbr full comms
Number of times that the neighbor is in full communication
status.
Topology message counters
Total
Number of total topology messages.
Hellos
Number of hello messages.
Topology DB
Number of topology database messages.
Topology update
Number of topology database update messages.
Link event
Number of link events messages.
Reinitialise
Number of reinitialise messages.
1-hop transport
Number of 1-hop transport messages.
Layer-2
transport
Number of layer 2 transport messages.
Link event
Number of link events messages.
Reinitialise
Number of reinitialise messages.
1-hop transport
Number of 1-hop transport messages.
Layer-2
transport
Number of layer 2 transport messages.
Topology error
counters
Reasons why a neighboring unit could not join the stack.
Version
unsupported
Number of stack software version unsupported errors.
Product
unsupported
Number of Product unsupported errors.
XEM unsupported
Number of XEM unsupported errors.
Too many units
Number of too may units errors.
Invalid messages
Number of invalid messages.
Health status
good
The number of times that the resiliency link has successfully
carried healthchecks following a failure at startup.
Health status
bad
The number of times that the resiliency link healthcheck has
timed out. A timeout occurs when a backup stack member
detects a delay greater than two seconds between
healthcheck messages received.
Rx
The total number of healthcheck messages that a stack
member has received from the stack master.
Rx Error
The total number of invalid healthcheck messages that have
been received from the master. This message is not applicable
to the stack master.
Table 83-1: Parameters in the output of the show counter stack command(cont.)
Parameters
Description