Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 188)

File Management Commands
Software Reference for x310 Series Switches
7.42 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show running-config ip route
Use this command to show the running system static IPv4 route configuration.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show running-config ip route
Mode Privileged Exec and Global Configuration
Example To display the running system static IPv4 route configuration, use the command:
Output Figure 7-16: Example output from the show running-config ip route command
Related Commands copy running-config
show running-config
show running-config ipv6 access-list
Use this command to show the running system status and configuration for IPv6 ACLs.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show running-config ipv6 access-list
Mode Privileged Exec and Global Configuration
Example To display the running system status and configuration for IPv6 ACLs, use the command:
Output Figure 7-17: Example output from the show running-config ipv6 access-list
command
Related Commands copy running-config
show running-config
awplus# show running-config ip route
!
ip route 3.3.3.3/32 vlan3
ip route 3.3.3.3/32 vlan2
!
awplus# show running-config ipv6 access-list
!
ipv6 access-list abc permit any
!