Table 50-1 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1312
Local RADIUS Server Introduction and Configuration
Software Reference for x310 Series Switches
50.10
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Table 50-1: Standard RADIUS Attributes
Attribute ID and Name
Value Type/Pre-defined Values
1
User-Name
string
2
User-Password
string
3
CHAP-Password
octets (Hexadecimal string followed by 0x)
4
NAS-IP-Address
ipaddr (IPv4 address)
5
NAS-Port
Integer
6
Service-Type
Integer. Valid values are:
■
Administrative-User (6)
■
Authenticate-Only (8)
■
Authorize-Only (17)
■
Callback-Administrative (11)
■
Callback-Framed-User (4)
■
Callback-Login-User (3)
■
Callback-NAS-Prompt (9)
■
Call-Check (10)
■
Framed-Management (18)
■
Framed-User (2)
■
Login-User (1)
■
NAS-Prompt-User (7)
■
Outbound-User (5)
7
Framed-Protocol
Integer. Valid values are:
■
ARAP (3)
■
Gandalf-SLML (4)
■
PPP (1)
■
SLIP (2)
■
X.75-Synchronous (6)
■
Xylogics-IPX-SLIP (5)
8
Framed-IP-Address
ipaddr (IPv4 address)
9
Framed-IP-Netmask
ipaddr (IPv4 address)
10
Framed-Routing
integer. Valid values are:
■
Broadcast (1)
■
Broadcast-Listen (3)
■
Listen (2)
■
None (0)
11
Filter-Id
string
12
Framed-MTU
Integer
13
Framed-Compression
Integer. Valid values are:
■
IPX-Header-Compression (2)
■
None (0)
■
Stac-LZS (3)
■
Van-Jacobson-TCP-IP (1)
14
Login-IP-Host
IP Address