Show lldp neighbors, Show lldp neighbors [interface Page 1969
Page 1969
![background image](/manuals/427254/1969/background.png)
LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
71.43
show lldp neighbors
This command displays a summary of information received from neighbors via specified
ports. If no port list is supplied, neighbor information for all ports is displayed.
Syntax
show lldp neighbors [interface <port-list>]
Mode
User Exec and Privileged Exec
Examples
To display neighbor information received via all ports, use the command:
To display neighbor information received via ports 1.0.1 and 1.0.6 with LLDP-MED
configuration, use the command:
Output
Figure 71-5: Example output from the show lldp neighbors command
Parameter
Description
<port-list>
The ports for which the neighbor information is to be shown.
awplus#
show lldp neighbors
awplus#
show lldp neighbors interface port1.0.1,port1.0.6
LLDP Neighbor Information:
Total number of neighbors on these ports .... 4
System Capability Codes:
O = Other P = Repeater B = Bridge W = WLAN Access Point
R = Router T = Telephone C = DOCSIS Cable Device S = Station Only
LLDP-MED Device Type and Power Source Codes:
1 = Class I 3 = Class III PSE = PoE Both = PoE&Local Prim = Primary
2 = Class II N = Network Con. Locl = Local Unkn = Unknown Back = Backup
Local Neighbor Neighbor Neighbor System MED
Port Chassis ID Port ID Sys Name Cap. Ty Pwr
----------------------------------------------------------------------------------
1.0.1 002d.3044.7ba6 port1.0.2 awplus OPBWRTCS
1.0.1 0011.3109.e5c6 port1.0.3 AT-9924 switch/route... --B-R---
1.0.6 0000.10cf.8590 port3 AR-442S --B-R---
1.0.6 00ee.4352.df51 192.168.1.2 Jim’s desk phone --B--T-- 3 PSE
Table 71-5: Parameters in the output of the show lldp neighbors command
Parameter
Description
Local Port
Local port on which the neighbor information was
received.
Neighbor Chassis ID
Chassis ID that uniquely identifies the neighbor.
Neighbor Port Name
Port ID of the neighbor.
Neighbor Sys Name
System name of the LLDP neighbor.