Clear mac address-table dynamic – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 367
Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
15.5
clear mac address-table dynamic
Use this command to clear the filtering database of all entries learned for a selected MAC
address, an MSTP instance, a switch port interface or a VLAN interface.
Syntax
clear mac address-table dynamic
[address
vlan
Mode
Privileged Exec
Usage
Use this command with options to clear the filtering database of all entries learned for a
given MAC address, interface or VLAN. Use this command without options to clear any
learned entries.
Use the optional instance parameter to clear the filtering database entries associated
with a specified MSTP instance Note that you must first specify a switch port interface
before you can specify an MSTP instance.
Compare this usage and operation with the
clear mac address-table static command on
. Note that an MSTP instance cannot be specified with clear mac address-table
static.
Examples
This example shows how to clear all dynamically learned filtering database entries for all
interfaces, addresses, VLANs.
Parameter
Description
interface
Specify a switch port to be cleared from the filtering database.
Specify the switch port from which address entries will be cleared.
This can be a single switch port, (e.g. port1.0.4), a static
channel group (e.g. sa2), or a dynamic (LACP) channel group (e.g.
po2
).
address
Specify a MAC (Media Access Control) address to be cleared from
the filtering database.
Enter a MAC address to be cleared from the database in the format
HHHH.HHHH.HHHH.
instance
Specify an MSTP (Multiple Spanning Tree) instance to be cleared
from the filtering database.
Enter an MSTP instance in the range <1-63> to be cleared from
the filtering database.
vlan
Specify a VLAN to be cleared from the filtering database.
Enter a VID (VLAN ID) in the range <1-4094> to be cleared from
the filtering database.
awplus#
clear mac address-table dynamic