beautypg.com

Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1879

background image

SNMP MIBs

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

TM

Operating System - Version 5.4.4C

69.67

restartStkMemberDevice

{ setup 4 }

This object causes a specified device to restart
immediately. The restart is initiated by setting its
value to the device's stack member ID. Setting its
value to zero will cause all devices in the stack, or a
standalone device, to restart. Reading the object will
always return zero.

serviceConfig

{ setup 5 }

srvcTelnetEnable

{ serviceConfig 1 }

This object is used to either read or set the state of the
telnet server on a device. Telnet can be enabled by
setting the value of this object to ‘enable(1)’ or can be
disabled by setting the value ‘disable(2)’.

srvcSshEnable

{ serviceConfig 2 }

This object is used to either read or set the state of the
SSH server on a device. SSH can be enabled by setting
the value of this object to ‘enable(1)’ or can be
disabled by setting the value ‘disable(2)’.

guiConfig

{ setup 6 }

guiAppletConfig

{ guiConfig 1 }

guiAppletSysSwVer

{ guiAppletConfig 1 }

This object represents the system software release
that the currently selected GUI applet was designed
to run on.

The system automatically searches for GUI applet files
that reside in the root directory of the Flash memory,
and selects the latest available file that is applicable to
the currently running system software. This is the
applet that will be uploaded to a user's web browser
when they initiate the GUI.

{ guiAppletConfig 2 }

This object represents the software version of the
currently selected GUI applet.

The system automatically searches for GUI applet files
residing in the root directory of the Flash memory,
and selects the latest available one that is applicable
to the currently running system software. This is the
applet that will be uploaded to a user's web browser
when they initiate the GUI.

Table 69-18: Objects defined in AT-SETUP-MIB

Object Identifier

Description

Object Identifier