Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 116)

User Access Commands
Software Reference for x310 Series Switches
5.30 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show privilege
This command displays the current user privilege level, which can be any privilege level in
the range <1-15>. Privilege levels <1-6> allow limited user access (all User Exec
commands), privilege levels <7-14> allow restricted user access (all User Exec commands
plus Privileged Exec show commands). Privilege level 15 gives full user access to all
Privileged Exec commands.
Syntax show privilege
Mode User Exec and Privileged Exec
Usage A user can have an intermediate CLI security level set with this command for privilege
levels <7-14> to access all show commands in Privileged Exec mode and all commands in
User Exec mode, but no configuration commands in Privileged Exec mode.
Example To show the current privilege level of the user, use the command:
Output Figure 5-3: Example output from the show privilege command
Related Commands privilege level
awplus# show privilege
awplus#show privilege
Current privilege level is 15
awplus#disable
awplus>show privilege
Current privilege level is 1