Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1973

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
71.47
Related Commands
System Description
Neighbor’s system description.
System Capabilities
(Supported)
Capabilities that the neighbor supports.
System Capabilities
(Enabled)
Capabilities that are enabled on the
neighbor.
Management Addresses
List of neighbor’s management addresses.
Port VLAN ID (PVID)
VLAN identifier associated with untagged or
priority tagged frames for the neighbor port.
Port & Protocol VLAN
(Supported)
Whether Port & Protocol VLAN is supported
on the LLDP neighbor.
Port & Protocol VLAN
(Enabled)
Whether Port & Protocol VLAN is enabled on
the LLDP neighbor.
Port & Protocol VLAN (VIDs)
List of Port & Protocol VLAN identifiers.
VLAN Names
List of names of VLANs that the neighbor’s
port belongs to.
Protocol IDs
List of protocols that are accessible through
the neighbor’s port.
MAC/PHY Auto-negotiation
Auto-negotiation configuration and status
Power Via MDI (PoE)
PoE configuration and status of 802.3 Power-
Via-MDI TLV
Link Aggregation
Link aggregation information
Maximum Frame Size
The maximum frame size capability
LLDP-MED Device Type
LLDP-MED Device type
LLDP-MED Capabilities
LLDP-MED capabilities supported
Network Policy
List of network policies
Location Identification
Location information
Extended Power Via MDI (PoE)
PoE-capability and current status
Inventory Management
Inventory information
Table 71-6: Parameters in the output of the show lldp neighbors detail
Parameter
Description