Ntp broadcastdelay – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1675
NTP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
62.5
ntp broadcastdelay
Use this command to set the estimated round-trip delay for broadcast packets.
Use the no variant of this command to reset the round-trip delay for broadcast packets to
the default offset of 0 microseconds.
Syntax
ntp broadcastdelay <delay>
no ntp broadcastdelay
Default
0
microsecond offset, which can only be applied with the no variant of this command.
Mode
Global Configuration
Examples
To set the estimated round-trip delay to 23464 microseconds for broadcast packets, use
these commands:
To reset the estimated round-trip delay for broadcast packets to the default setting (0
microseconds), use these commands:
Parameter
Description
<1-999999>
The broadcast delay in microseconds.
awplus#
configure terminal
awplus(config)#
ntp broadcastdelay 23464
awplus#
configure terminal
awplus(config)#
no ntp broadcastdelay