Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 654)

IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
25.20 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
ip dns forwarding timeout
Use this command to set the time period for the DNS Relay to wait for a DNS response.
Use the no variant of this command to set the time period to wait for a DNS response to
the default of 3 seconds.
Syntax ip dns forwarding timeout <0-3600>
no ip dns forwarding timeout
Default The default timeout value is 3 seconds.
Mode Global Configuration
Usage See “DNS Relay” on page 24.7 for more information about DNS Relay to map IPv4 and
IPv6 addresses to name servers to maintain a a database of hostname-to-address
mappings.
Examples To set the timeout value to 12 seconds, use the commands:
To set the timeout value to the default of 3 seconds, use the commands:
Related Commands debug ip dns forwarding
ip dns forwarding
show ip dns forwarding
Parameter Description
<0-3600> Timeout value in seconds.
awplus# configure terminal
awplus(config)# ip dns forwarding timeout 12
awplus# configure terminal
awplus(config)# no ip dns forwarding timeout