Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 217)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 8.17
To activate the Find Me feature for the default duration on switch port interfaces
port1.0.2 through port1.0.4, use the following command:
In the example above, ports 2 to 4 will flash 4 times and then all ports will flash twice. Each
alternate flash will be amber (if that device has amber LEDs). This pattern will repeat until
timeout or no findme commands are used.
To deactivate the Find Me feature, use the following command:
To activate the Find Me feature for the default duration on stack member 2, use the
following command:
In the example above, all ports on member 2 will flash 4 times and then all ports in the
stack will flash twice. Each alternate flash will be amber (if that device has amber LEDs).
This pattern will repeat until the timeout expires or the no findme commands is used.
awplus# findme interface port1.0.2-1.0.4
awplus# no findme
awplus# findme member 2