Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1542)

EPSR Commands
Software Reference for x310 Series Switches
58.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show epsr counters
This command displays counter information about all EPSR instances.
Syntax show epsr counters
Mode User Exec and Privileged Exec
Example To show the counters of all EPSR instances, use the command:
Related Commands epsr mode master controlvlan primaryport
epsr mode transit controlvlan
show epsr
show epsr summary
This command displays summary information about all EPSR instances on the switch
Syntax show epsr summary
Mode User Exec and Privileged Exec
Example To display EPSR summary information, use the command:
Related Commands show epsr
show epsr common segments
show epsr counters
undebug epsr
This command applies the functionality of the no debug epsr command on page 58.2.
awplus# show epsr counters
awplus# show epsr summary
Figure 58-5: Example output from the show epsr summary command
EPSR Summary Information
Abbreviations:
M = Master node
T = Transit node
C = is on a common segment with other instances
P = instance on a common segment has physical control of the shared port's
data VLAN blocking
LB = ring port is Logically Blocking - applicable to master only
EPSR Ctrl Primary/1st Secondary/2nd
Instance Mode Status State VLAN Prio Port Status Port Status
--------------------------------------------------------------------------------
test-12345 T Enabled Links-Down 6 127 Blocking (C,P) Blocking (C,P)
test1 M Enabled Complete 5 12 Fwding Fwding (LB)
test2 T Enabled Pre-Fwding 4 126 Fwding (C) Blocking (C)
localB T Disabled Idle 40 0 Unknown Unknown
localC T Disabled Idle 41 0 Unknown Unknown
--------------------------------------------------------------------------------