Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 280)

Logging Commands
Software Reference for x310 Series Switches
10.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
log buffered (filter)
Use this command to create a filter to select messages to be sent to the buffered log.
Selection can be based on the priority/ severity of the message, the program that
generated the message, the logging facility used, a sub-string within the message or a
combination of some or all of these.
The no variant of this command removes the corresponding filter, so that the specified
messages are no longer sent to the buffered log.
Syntax log buffered [level ] [program ]
[facility ] [msgtext ]
no log buffered [level ] [program ]
[facility ] [msgtext ]
Parameter Description
level Filter messages to the buffered log by severity level.
<level> The minimum severity of message to send to the buffered log. The
level can be specified as one of the following numbers or level
names, where 0 is the highest severity and 7 is the lowest severity:
0 emergencies: System is unusable
1 alerts Action must be taken immediately
2 critical Critical conditions
3 errors Error conditions
4 warnings Warning conditions
5 notices Normal, but significant, conditions
6 informational Informational messages
7 debugging Debug-level messages
program Filter messages to the buffered log by program. Include messages
from a specified program in the buffered log.
<program-
name> The name of a program to log messages from, either one of the
following predefined program names (not case-sensitive), or
another program name (case-sensitive) that you find in the log
output.
rsvp Resource Reservation Protocol (RSVP)
dot1x IEEE 802.1X Port-Based Access Control
lacp Link Aggregation Control Protocol (LACP)
stp Spanning Tree Protocol (STP)
rstp Rapid Spanning Tree Protocol (RSTP)
mstp Multiple Spanning Tree Protocol (MSTP)
imi Integrated Management Interface (IMI)
imish Integrated Management Interface Shell (IMISH)
epsr Ethernet Protection Switched Rings (EPSR)
irdp ICMP Router Discovery Protocol (IRDP)
rmon Remote Monitoring
loopprot Loop Protection
poe Power-inline (Power over Ethernet)
dhcpsn DHCP snooping (DHCPSN)