Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 262
System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.62
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Default
Captures all information for the switch.
By default the output is saved to the file ‘
tech-support.txt.gz
’ in the current directory.
If this file already exists in the current directory then a new file is generated with the time
stamp appended to the file name, for example ‘
tech-support20080109.txt.gz
’, so the
last saved file is retained.
Usage
This command is useful for collecting a large amount of information about all protocols or
specific protocols on your switch so that it can then be analyzed for troubleshooting
purposes. The output of this command can be provided to technical support staff when
reporting a problem.
Mode
Privileged Exec
Examples
show tech-support
Output
The output of this command may include the result of the following commands:
show arp
show arp security
show arp security interface
show arp security statistics
show boot
show counter dhcp-client
show counter dhcp-relay
show counter dhcp-server
show counter log
show counter mail
show counter ntp
show counter ping-poll
show counter snmp-server
show counter stack
show cpu
show cpu history
show diagnostic channel-group
show etherchannel
show etherchannel detail
show exception log
show interface
show interface brief
show ip dhcp snooping
show ip dhcp snooping acl
show ip dhcp snooping binding
show ip dhcp snooping interface
show ip dhcp snooping statistics
show ip igmp groups
show ip igmp interface
show ip igmp snooping mrouter
show ip interface
awplus#
show tech-support
Note
You can manage your show output, or make it a more selective, by using a command
modifier. For information on using show-command modifiers, see:
.