Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 849)

IPv4 Hardware Access Control List (ACL) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 34.3
IPv4 Hardware Access List Commands and
Prompts
Many of the ACL commands operate from sub-modes that are specific to particular ACL
types. The table
“IPv4 Hardware Access List Commands and Prompts” shows the CLI
prompts at which ACL commands are entered.
Table 34-1: IPv4 Hardware Access List Commands and Prompts
Command Name Command Mode Prompt
show interface access-group Privileged Exec
awplus#
show access-list (IPv4 Hardware
ACLs) Privileged Exec
awplus#
show interface access-group Privileged Exec
awplus#
access-group Global Configuration
awplus(config)#
access-list (hardware IP numbered) Global Configuration
awplus(config)#
access-list (hardware MAC
numbered) Global Configuration
awplus(config)#
access-list hardware (named) Global Configuration
awplus(config)#
access-group Interface Configuration
awplus(config-if)#
(access-list hardware ICMP filter) IPv4 Hardware ACL Configuration
awplus(config-ip-hw-acl)#
(access-list hardware IP protocol
filter) IPv4 Hardware ACL Configuration
awplus(config-ip-hw-acl)#
(access-list hardware MAC filter) IPv4 Hardware ACL Configuration
awplus(config-ip-hw-acl)#
(access-list hardware TCP UDP filter) IPv4 Hardware ACL Configuration
awplus(config-ip-hw-acl)#
commit (IPv4) IPv4 Hardware ACL Configuration
awplus(config-ip-hw-acl)#